- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Clostridium acidurici Medium
[所属分类:培养基配方] [发布时间:2021-11-12] [发布人:网站管理员2] [阅读次数:] [返回]
Clostridium acidurici Medium
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
Uric acid..............................................................2.0g
Yeast extract........................................................1.0g
K2HPO4.............................................................0.91g
KOH..................................................................0.67g
Sodium thioglycolate..........................................0.5g
MgSO4·7H2O....................................................0.25g
CaCl2·2H2O ....................................................0.015g
FeSO4·7H2O.....................................................6.0mg
NaHCO3 solution .......................................... 25.0mL
Sodium thioglycolate solution ...................... 25.0mL
pH 7.0–7.5 at 25°C
NaHCO3 Solution:
Composition per 25.0mL:
NaHCO3..............................................................5.0g
Preparation of NaHCO3 Solution: Add
NaHCO3 to distilled/deionized water and bring vol
ume to 25.0mL. Mix thoroughly. Filter sterilize.
Sodium Thioglycolate Solution:
Composition per 25.0mL:
Sodium thioglycolate..........................................0.5g
Preparation of Sodium Thioglycolate Solu
tion: Add sodium thioglycolate to distilled/deion
ized water and bring volume to 25.0mL. Mix
thoroughly. Autoclave solution separately for 15 min
at 15 psi pressure–121°C.
Preparation of Medium: Add K2HPO4 and KOH
to distilled/deionized water and bring volume to 1.0L.
Add uric acid. Gently heat until boiling. Add the re
maining components, except NaHCO3 and sodium
thioglycolate. Mix thoroughly. Adjust pH to 7.0–7.5.
Distribute into tubes or flasks. Autoclave for 15 min at
15 psi pressure–121°C. Add 0.25mL of sterile
NaHCO3 solution and 0.25mL of sterile sodium
thioglycolate solution for each 10.0mL of sterile basal
medium.
Use: For the cultivation and maintenance of
Clostridium acidurici, Clostridium purinolyticum,
and other bacteria that can utilize uric acid as a car
bon source.