- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
Desulfurella II Medium (DSMZ Medium 480c)
山东拓普生物工程有限公司
Shandong Tuopu Biol-Engineering Co.,Ltd
Desulfurella II Medium
(DSMZ Medium 480c)
培养基配方
Composition per liter:
MOPS [3-(N-morpholino) propane sulfonic acid]................................3.0g
Sulfur, powder ..............................................................1.0g
NH4Cl ......................................................................0.33g
CaCl2 ·2H2O ...............................................................0.33g
MgCl2 ·6H2O ...............................................................0.33g
KCl.........................................................................0.33g
KH2PO4 .....................................................................0.33g
Yeast extract................................................................0.1g
Resazurin...................................................................1.0mg
NaHCO3 solution.............................................................40.0mL
Na2S·9H2O solution.........................................................10.0mL
Vitamin solution............................................................10.0mL
Substrate solution..........................................................10.0mL
Trace elements solution SL-10................................................1.0mL
pH 6.9 ± 0.2 at 25°C
NaHCO3 Solution:
Composition per 10.0mL:
NaHCO3 ......................................................................2.0g
Preparation of NaHCO3 Solution: Add NaHCO3 to distilled/de-
ionized water and bring volume to 10.0mL. Mix thoroughly. Autoclave
for 15 min at 15 psi pressure–121°C. Cool to 25°C. Must be prepared
freshly.
Trace Elements Solution SL-10:
Composition per liter:
FeCl2 ·4H2O.................................................................1.5g
CoCl2 ·6H2O..............................................................190.0mg
MnCl2 ·4H2O .............................................................100.0mg
ZnCl2 .....................................................................70.0mg
Na2MoO4 ·2H2O.............................................................36.0mg
NiCl2 ·6H2O...............................................................24.0mg
H3BO3 ......................................................................6.0mg
CuCl2 ·2H2O................................................................2.0mg
HCl (25% solution).........................................................10.0mL
Preparation of Trace Elements Solution SL-10: Add FeCl2 ·4H2O
to 10.0mL of HCl solution. Mix thoroughly. Add distilled/deionized
water and bring volume to 1.0L. Add remaining components. Mix thor-
oughly. Sparge with 100% N2 . Autoclave for 15 min at 15 psi pressure–
121°C.
Vitamin Solution:
Composition per liter:
Pyridoxine-HCl..........................................................10.0mg
Thiamine-HCl·2H2O.......................................................5.0mg
Riboflavin...............................................................5.0mg
Nicotinic acid...........................................................5.0mg
D -Ca-pantothenate ......................................................5.0mg
p-Aminobenzoic acid......................................................5.0mg
Lipoic acid..............................................................5.0mg
Biotin ..................................................................2.0mg
Folic acid...............................................................2.0mg
Vitamin B 12 ............................................................0.1mg
Preparation of Vitamin Solution: Add components to distilled/
deionized water and bring volume to 1.0L. Mix thoroughly. Sparge
with 80% H2 + 20% CO2 . Filter sterilize.
Na2S·9H2O Solution:
Composition per 10.0mL:
Na2S·9H2O................................................................0.5g
Preparation of Na2S·9H2O Solution: Add Na2S·9H2O to dis-
tilled/deionized water and bring volume to 10.0mL. Sparge with N2 .
Autoclave for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Substrate Solution:
Composition per 10.0mL:
Na-lactate................................................................2.5g
Preparation of Substrate Solution: Add Na-lactate to distilled/
deionized water and bring volume to 10.0mL. Sparge with N2 . Auto-
clave for 15 min at 15 psi pressure–121°C. Cool to 25°C. Store anaer-
obically.
Preparation of Medium: Prepare and dispense medium under an
oxygen-free 80% N2 + 20% CO2 gas mixture. Add components, except
sulfur, substrate solution, vitamin solution, NaHCO3 solution, and
Na2S·9H2O solution, to 930.0mL distilled/deionized water. Mix thor-
oughly. Sparge for 30 min with 80% N2 + 20% CO2 . Adjust pH to 5.9
with concentrated NaOH. Distribute under 80% N2 + 20% CO2 into an-
aerobic tubes or bottles containing sulfur powder (100mg S per
10.0mL medium). Autoclave 20 min at 110°C. Sparge with 80% N2 +
20% CO2 . Aseptically and anaerobically add 10.0mL sterile
Na2S·9H2O solution, 10.0mL sterile vitamin solution, 10.0mL sub-
strate solution, and 40.0mL sterile NaHCO3 solution per liter of medi-
um.
Use: For the cultivation of Thermoproteus uzoniensis and Desulfurella
kamchatkensis DSM 10409.