- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Mineral Medium with 3-Aminophenol (DSMZ Medium 465f)
[所属分类:培养基配方] [发布时间:2021-6-1] [发布人:网站管理员2] [阅读次数:] [返回]
Mineral Medium with 3-Aminophenol
(DSMZ Medium 465f)
KH 2 PO 4 .........................................................................................1.0g
(NH 4 ) 2 SO 4 ....................................................................................0.5g
MgCl 2 ·6H 2 O .................................................................................0.1g
Ca(NO 3 ) 2 ·4H 2 O ..........................................................................0.05g
Aminophenol solution .............................................................10.0mL
Trace elements solution SL-4....................................................1.0mL
pH 7.25 ± 0.2 at 25°C
Trace Elements Solution SL-4:
Composition per liter:
EDTA............................................................................................0.5g
FeSO 4 ·7H 2 O..................................................................................0.2g
Trace elements solution SL-6................................................100.0mL
Trace Elements Solution SL-6:
Composition per liter:
H 3 BO 3 ...........................................................................................0.3g
CoCl 2 ·6H 2 O..................................................................................0.2g
ZnSO 4 ·7H 2 O.................................................................................0.1g
MnCl 2 ·4H 2 O ...............................................................................0.03g
Na 2 MoO 4 ·H 2 O............................................................................0.03g
NiCl 2 ·6H 2 O.................................................................................0.02g
CuCl 2· ·2H 2 O................................................................................0.01g
Preparation of Trace Elements Solution SL-6: Add components
to distilled/deionized water and bring volume to 1.0L. Mix thoroughly.
Adjust pH to 3.4.
Preparation of Trace Elements Solution SL-4: Add components
to distilled/deionized water and bring volume to 1.0L. Mix thoroughly.
Aminophenol Solution:
Composition per 100.0mL:
3-Aminophenol.............................................................................1.0g
Preparation of Aminophenol Solution: Add 100.0mL boiling
water to 1.0g aminophenol crystals. Stir the solution to mix thoroughly.
Cool to room temperature. Sterilize by filtration.
Preparation of Medium: Add components, except aminophenol so-
lution, to 990.0mL distilled/deionized water. Adjust pH to 7.25. Auto-
clave for 15 min at 15 psi pressure–121°C. Aseptically add 10.0mL
aminophenol solution. Mix thoroughly. Aseptically distribute to sterile
tubes or flasks.
Use: For the cultivation of Arthrobacter sp. and other aminophenol-uti-
lizing bacteria.
(DSMZ Medium 465f)
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
Na 2 HPO 4 ·2H 2 O.............................................................................3.5gKH 2 PO 4 .........................................................................................1.0g
(NH 4 ) 2 SO 4 ....................................................................................0.5g
MgCl 2 ·6H 2 O .................................................................................0.1g
Ca(NO 3 ) 2 ·4H 2 O ..........................................................................0.05g
Aminophenol solution .............................................................10.0mL
Trace elements solution SL-4....................................................1.0mL
pH 7.25 ± 0.2 at 25°C
Trace Elements Solution SL-4:
Composition per liter:
EDTA............................................................................................0.5g
FeSO 4 ·7H 2 O..................................................................................0.2g
Trace elements solution SL-6................................................100.0mL
Trace Elements Solution SL-6:
Composition per liter:
H 3 BO 3 ...........................................................................................0.3g
CoCl 2 ·6H 2 O..................................................................................0.2g
ZnSO 4 ·7H 2 O.................................................................................0.1g
MnCl 2 ·4H 2 O ...............................................................................0.03g
Na 2 MoO 4 ·H 2 O............................................................................0.03g
NiCl 2 ·6H 2 O.................................................................................0.02g
CuCl 2· ·2H 2 O................................................................................0.01g
Preparation of Trace Elements Solution SL-6: Add components
to distilled/deionized water and bring volume to 1.0L. Mix thoroughly.
Adjust pH to 3.4.
Preparation of Trace Elements Solution SL-4: Add components
to distilled/deionized water and bring volume to 1.0L. Mix thoroughly.
Aminophenol Solution:
Composition per 100.0mL:
3-Aminophenol.............................................................................1.0g
Preparation of Aminophenol Solution: Add 100.0mL boiling
water to 1.0g aminophenol crystals. Stir the solution to mix thoroughly.
Cool to room temperature. Sterilize by filtration.
Preparation of Medium: Add components, except aminophenol so-
lution, to 990.0mL distilled/deionized water. Adjust pH to 7.25. Auto-
clave for 15 min at 15 psi pressure–121°C. Aseptically add 10.0mL
aminophenol solution. Mix thoroughly. Aseptically distribute to sterile
tubes or flasks.
Use: For the cultivation of Arthrobacter sp. and other aminophenol-uti-
lizing bacteria.