- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Mycosel™ Agar (Cycloheximide Chloramphenicol Agar)
[所属分类:培养基配方] [发布时间:2021-6-16] [发布人:网站管理员2] [阅读次数:] [返回]
Mycosel™ Agar
(Cycloheximide Chloramphenicol Agar)
Papaic digest of soybean meal....................................................10.0g
Glucose.......................................................................................10.0g
Cycloheximide..............................................................................0.4g
Chloramphenicol.........................................................................0.05g
pH 6.9 ± 0.2 at 25°C
Caution: Cycloheximide is toxic. Avoid skin contact or aerosol for-
mation and inhalation.
Preparation of Medium: Add components to distilled/deionized
water and bring volume to 1.0L. Mix thoroughly. Gently heat while
stirring and bring to boiling. Autoclave for 15 min at 14 psi pressure–
118°C. Avoid overheating. Pour into sterile Petri dishes or distribute
into sterile tubes.
Use: For the selective isolation of pathogenic fungi from specimens
with other fungi and bacteria.
(Cycloheximide Chloramphenicol Agar)
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
Agar............................................................................................15.5gPapaic digest of soybean meal....................................................10.0g
Glucose.......................................................................................10.0g
Cycloheximide..............................................................................0.4g
Chloramphenicol.........................................................................0.05g
pH 6.9 ± 0.2 at 25°C
Caution: Cycloheximide is toxic. Avoid skin contact or aerosol for-
mation and inhalation.
Preparation of Medium: Add components to distilled/deionized
water and bring volume to 1.0L. Mix thoroughly. Gently heat while
stirring and bring to boiling. Autoclave for 15 min at 14 psi pressure–
118°C. Avoid overheating. Pour into sterile Petri dishes or distribute
into sterile tubes.
Use: For the selective isolation of pathogenic fungi from specimens
with other fungi and bacteria.