- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Propionigenium modestum Medium (DSMZ Medium 293)
[所属分类:培养基配方] [发布时间:2021-7-14] [发布人:网站管理员2] [阅读次数:] [返回]
Propionigenium modestum Medium
(DSMZ Medium 293)
MgCl 2 ·6H 2 O .................................................................................3.0g
KCl................................................................................................0.5g
NH 4 Cl .........................................................................................0.25g
KH 2 PO 4 .........................................................................................0.2g
CaCl 2 ·2H 2 O ................................................................................0.15g
Resazurin ...................................................................................1.0mg
NaHCO 3 solution.....................................................................10.0mL
Na 2 -succinate solution.............................................................10.0mL
Na 2 S·9H 2 O solution.................................................................10.0mL
Yeast extract solution...............................................................10.0mL
Trace elements solution SL-10..................................................1.0mL
pH 7.2 ± 0.2 at 25°C
Na 2 S·9H 2 O Solution :
Composition per 10.0mL:
Na 2 S·9H 2 O..................................................................................0.36g
Preparation of Na 2 S·9H 2 O Solution: Add Na 2 S·9H 2 O to dis-
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Autoclave under 100% N 2 for 15 min at 15 psi pressure–121°C. Cool
to room temperature.
NaHCO 3 Solution:
Composition per 10.0mL:
NaHCO 3 ........................................................................................2.5g
Preparation of NaHCO 3 Solution: Add NaHCO 3 to distilled/de-
ionized water and bring volume to 10.0mL. Mix thoroughly. Sparge
with 80% N 2 + 20% CO 2 . Filter sterilize.
Na 2 -succinate Solution:
Composition per 10.0mL:
Na 2 -succinate..............................................................................3.25g
Preparation of Na 2 -succinate Solution: Add Na 2 -succinate to
distilled/deionized water and bring volume to 10.0mL. Mix thorough-
ly. Sparge with 100% N 2 . Filter sterilize.
Yeast Extract Solution:
Composition per 10.0mL:
Yeast extract..................................................................................1.0g
Preparation of Yeast Extract Solution: Add yeast extract to dis-
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Sparge with 100% N 2 . Autoclave under 100% N 2 for 15 min at 15 psi
pressure–121°C. Cool to room temperature.
Trace Elements Solution SL-10:
Composition per liter:
FeCl 2 ·4H 2 O...................................................................................1.5g
CoCl 2 ·6H 2 O ...........................................................................190.0mg
MnCl 2 ·4H 2 O...........................................................................100.0mg
ZnCl 2 ........................................................................................70.0mg
Na 2 MoO 4 ·2H 2 O .......................................................................36.0mg
NiCl 2 ·6H 2 O..............................................................................24.0mg
H 3 BO 3 ........................................................................................6.0mg
CuCl 2 ·2H 2 O ...............................................................................2.0mg
HCl (25% solution)..................................................................10.0mL
Preparation of Trace Elements Solution SL-10: Add FeCl 2 ·4H 2 O
to 10.0mL of HCl solution. Mix thoroughly. Add distilled/deionized
water and bring volume to 1.0L. Add remaining components. Mix thor-
oughly. Sparge with 80% N 2 + 20% CO 2 . Filter sterilize.
Preparation of Medium: Prepare and dispense medium under 80%
N 2 + 20% CO 2 gas atmosphere. Add components, except NaHCO 3 solu-
tion, Na 2 -succinate solution, Na 2 S·9H 2 O solution, yeast extract solu-
tion, and trace elements solution SL-10, to distilled/deionized water and
bring volume to 959.0mL. Mix thoroughly. Adjust pH to 7.2. Sparge
with 80% N 2 + 20% CO 2 . Autoclave for 15 min at 15 psi pressure–
121°C. Aseptically and anaerobically add 10.0mL NaHCO 3 solution,
10.0mL Na 2 -succinate solution, 10.0mL Na 2 S·9H 2 O solution, 10.0mL
yeast extract solution, and 1.0mL trace elements solution SL-10. Mix
thoroughly. Aseptically and anaerobically distribute into sterile tubes or
bottles. After inoculation, flush and repressurize the gas head space of
culture bottles with sterile 80% N 2 + 20% CO 2 to 1 bar overpressure.
Use: For the cultivation of Propionigenium modestum DSM 2376.
(DSMZ Medium 293)
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
NaCl............................................................................................20.0gMgCl 2 ·6H 2 O .................................................................................3.0g
KCl................................................................................................0.5g
NH 4 Cl .........................................................................................0.25g
KH 2 PO 4 .........................................................................................0.2g
CaCl 2 ·2H 2 O ................................................................................0.15g
Resazurin ...................................................................................1.0mg
NaHCO 3 solution.....................................................................10.0mL
Na 2 -succinate solution.............................................................10.0mL
Na 2 S·9H 2 O solution.................................................................10.0mL
Yeast extract solution...............................................................10.0mL
Trace elements solution SL-10..................................................1.0mL
pH 7.2 ± 0.2 at 25°C
Na 2 S·9H 2 O Solution :
Composition per 10.0mL:
Na 2 S·9H 2 O..................................................................................0.36g
Preparation of Na 2 S·9H 2 O Solution: Add Na 2 S·9H 2 O to dis-
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Autoclave under 100% N 2 for 15 min at 15 psi pressure–121°C. Cool
to room temperature.
NaHCO 3 Solution:
Composition per 10.0mL:
NaHCO 3 ........................................................................................2.5g
Preparation of NaHCO 3 Solution: Add NaHCO 3 to distilled/de-
ionized water and bring volume to 10.0mL. Mix thoroughly. Sparge
with 80% N 2 + 20% CO 2 . Filter sterilize.
Na 2 -succinate Solution:
Composition per 10.0mL:
Na 2 -succinate..............................................................................3.25g
Preparation of Na 2 -succinate Solution: Add Na 2 -succinate to
distilled/deionized water and bring volume to 10.0mL. Mix thorough-
ly. Sparge with 100% N 2 . Filter sterilize.
Yeast Extract Solution:
Composition per 10.0mL:
Yeast extract..................................................................................1.0g
Preparation of Yeast Extract Solution: Add yeast extract to dis-
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Sparge with 100% N 2 . Autoclave under 100% N 2 for 15 min at 15 psi
pressure–121°C. Cool to room temperature.
Trace Elements Solution SL-10:
Composition per liter:
FeCl 2 ·4H 2 O...................................................................................1.5g
CoCl 2 ·6H 2 O ...........................................................................190.0mg
MnCl 2 ·4H 2 O...........................................................................100.0mg
ZnCl 2 ........................................................................................70.0mg
Na 2 MoO 4 ·2H 2 O .......................................................................36.0mg
NiCl 2 ·6H 2 O..............................................................................24.0mg
H 3 BO 3 ........................................................................................6.0mg
CuCl 2 ·2H 2 O ...............................................................................2.0mg
HCl (25% solution)..................................................................10.0mL
Preparation of Trace Elements Solution SL-10: Add FeCl 2 ·4H 2 O
to 10.0mL of HCl solution. Mix thoroughly. Add distilled/deionized
water and bring volume to 1.0L. Add remaining components. Mix thor-
oughly. Sparge with 80% N 2 + 20% CO 2 . Filter sterilize.
Preparation of Medium: Prepare and dispense medium under 80%
N 2 + 20% CO 2 gas atmosphere. Add components, except NaHCO 3 solu-
tion, Na 2 -succinate solution, Na 2 S·9H 2 O solution, yeast extract solu-
tion, and trace elements solution SL-10, to distilled/deionized water and
bring volume to 959.0mL. Mix thoroughly. Adjust pH to 7.2. Sparge
with 80% N 2 + 20% CO 2 . Autoclave for 15 min at 15 psi pressure–
121°C. Aseptically and anaerobically add 10.0mL NaHCO 3 solution,
10.0mL Na 2 -succinate solution, 10.0mL Na 2 S·9H 2 O solution, 10.0mL
yeast extract solution, and 1.0mL trace elements solution SL-10. Mix
thoroughly. Aseptically and anaerobically distribute into sterile tubes or
bottles. After inoculation, flush and repressurize the gas head space of
culture bottles with sterile 80% N 2 + 20% CO 2 to 1 bar overpressure.
Use: For the cultivation of Propionigenium modestum DSM 2376.