Castenholz DG Medium (Medium DG)

[所属分类:培养基配方] [发布时间:2020-4-9] [发布人:] [阅读次数:] [返回]

山东拓普生物工程有限公司

Shandong Tuopu Biol-Engineering Co.,Ltd

Castenholz DG Medium
(Medium DG)

培养基配方
Composition per liter:
Glycyl-glycine buffer.......................................0.8g
NaNO3 ......................................................0.7g
Na2HPO4 ...................................................0.11g
KNO3 .......................................................0.1g
MgSO4 ·7H2O................................................0.1g
Nitrilotriacetic acid.......................................0.1g
CaSO4 ·2H2O...............................................0.06g
NaCl.......................................................8.0mg
FeCl3 solution.............................................1.0mL
Micronutrient solution.....................................0.5mL
pH 7.5 ± 0.2 at 25°C
FeCl3 Solution:
Composition per liter:
FeCl3 ·6H2O...............................................2.28g
Preparation of FeCl3 Solution: Add FeCl3 ·6H2O to distilled/deion-
ized water and bring volume to 1.0L. Mix thoroughly.
Micronutrient Solution:
Composition per liter:
MnSO4 ·H2O................................................2.28g
H3BO3 ......................................................0.5g
ZnSO4 ·7H2O................................................0.5g
CoCl2 ·6H2O..............................................0.025g
CuSO4 ·5H2O..............................................0.025g
Na2MoO4 ·2H2O............................................0.025g
H2SO4 .....................................................0.5mL
Preparation of Micronutrient Solution:  Add components to dis-
tilled/deionized water and bring volume to 1.0L. Mix thoroughly.
Preparation of Medium: Add nitrilotriacetic acid to 500.0mL of
distilled/deionized water. Dissolve by adjusting pH to 6.5 with
KOH. Add remaining components. Mix thoroughly. Readjust pH to
8.1. Bring volume to 1.0L with distilled/deionized water. Mix thor-
oughly. Distribute into tubes or flasks. Autoclave for 15 min at 15
psi pressure–121°C.
Use: For the isolation of cyanobacteria, including thermophilic spe-
cies.