- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Mineral Base E for Heterotrophic Growth
[所属分类:培养基配方] [发布时间:2021-6-1] [发布人:网站管理员2] [阅读次数:] [返回]
Mineral Base E for Heterotrophic Growth
K 2 HPO 4 .........................................................................................1.2g
KH 2 PO 4 .....................................................................................0.624g
(NH 4 ) 2 SO 4 .....................................................................................0.5g
NaCl..............................................................................................0.1g
CaCl 2 ·6H 2 O solution................................................................10.0mL
MgSO 4 ·7H 2 O solution.............................................................10.0mL
Sodium pyruvate solution........................................................10.0mL
Mineral solution.........................................................................1.0mL
p-Aminobenzoic acid solution...................................................1.0mL
CaCl 2 ·6H 2 O Solution:
Composition per liter:
CaCl 2 ·6H 2 O...................................................................................5.0g
Preparation of CaCl 2 ·6H 2 O Solution : Add CaCl 2 ·6H 2 O to dis-
tilled/deionized water and bring volume to 1.0L. Mix thoroughly. Au-
toclave for 15 min at 15 psi pressure–121°C.
MgSO 4 ·7H 2 O Solution:
Composition per liter:
MgSO 4 ·7H 2 O..............................................................................20.0g
Preparation of MgSO 4 ·7H 2 O Solution: Add MgSO 4 ·7H 2 O to
distilled/deionized water and bring volume to 1.0L. Mix thoroughly.
Autoclave for 15 min at 15 psi pressure–121°C.
Sodium Pyruvate Solution:
Composition per 10.0mL:
Sodium pyruvate...........................................................................2.0g
Preparation of Sodium Pyruvate Solution: Add sodium pyru-
vate to distilled/deionized water and bring volume to 10.0mL. Mix
thoroughly. Filter sterilize.
p-Aminobenzoic Acid Solution:
Composition per 10.0mL:
p-Aminobenzoic acid.............................................................100.0mg
Preparation of p-Aminobenzoic Acid Solution: Add p-amin-
obenzoic acid to distilled/deionized water and bring volume to
10.0mL. Mix thoroughly. Autoclave for 15 min at 15 psi pressure–
121°C.
Mineral Solution:
Composition per 100.0mL:
Disodium EDTA.........................................................................1.58g
ZnSO4·7H2O................................................................................0.7g
MnSO 4 ·4H 2 O..............................................................................0.18g
FeSO 4 ·7H 2 O................................................................................0.16g
CoCl 2 ·6H 2 O..............................................................................0.052g
Na 2 MoO 4 ·2H 2 O........................................................................0.047g
CuSO 4 ·5H 2 O.............................................................................0.047g
Preparation of Medium: Add components, except CaCl 2 ·6H 2 O so-
lution, MgSO 4 ·7H 2 O solution, sodium pyruvate solution, and p-amin-
obenzoic acid solution, to distilled/deionized water and bring volume
to 969.0mL. Mix thoroughly. Autoclave for 15 min at 15 psi pressure–
121°C. Cool to 45°–50°C. Aseptically add in the following order:
10.0mL of the sterile CaCl 2 ·6H 2 O solution, 10.0mL of the sterile
MgSO 4 ·7H 2 O solution, 10.0mL of sterile sodium pyruvate solution,
and 1.0mL of sterile p-aminobenzoic acid solution. Mix thoroughly.
Aseptically distribute into sterile tubes or flasks.
Use: For the heterotrophic cultivation and maintenance of Pseudomo-
nas thermocarboxydovorans.
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
Noble agar...................................................................................15.0gK 2 HPO 4 .........................................................................................1.2g
KH 2 PO 4 .....................................................................................0.624g
(NH 4 ) 2 SO 4 .....................................................................................0.5g
NaCl..............................................................................................0.1g
CaCl 2 ·6H 2 O solution................................................................10.0mL
MgSO 4 ·7H 2 O solution.............................................................10.0mL
Sodium pyruvate solution........................................................10.0mL
Mineral solution.........................................................................1.0mL
p-Aminobenzoic acid solution...................................................1.0mL
CaCl 2 ·6H 2 O Solution:
Composition per liter:
CaCl 2 ·6H 2 O...................................................................................5.0g
Preparation of CaCl 2 ·6H 2 O Solution : Add CaCl 2 ·6H 2 O to dis-
tilled/deionized water and bring volume to 1.0L. Mix thoroughly. Au-
toclave for 15 min at 15 psi pressure–121°C.
MgSO 4 ·7H 2 O Solution:
Composition per liter:
MgSO 4 ·7H 2 O..............................................................................20.0g
Preparation of MgSO 4 ·7H 2 O Solution: Add MgSO 4 ·7H 2 O to
distilled/deionized water and bring volume to 1.0L. Mix thoroughly.
Autoclave for 15 min at 15 psi pressure–121°C.
Sodium Pyruvate Solution:
Composition per 10.0mL:
Sodium pyruvate...........................................................................2.0g
Preparation of Sodium Pyruvate Solution: Add sodium pyru-
vate to distilled/deionized water and bring volume to 10.0mL. Mix
thoroughly. Filter sterilize.
p-Aminobenzoic Acid Solution:
Composition per 10.0mL:
p-Aminobenzoic acid.............................................................100.0mg
Preparation of p-Aminobenzoic Acid Solution: Add p-amin-
obenzoic acid to distilled/deionized water and bring volume to
10.0mL. Mix thoroughly. Autoclave for 15 min at 15 psi pressure–
121°C.
Mineral Solution:
Composition per 100.0mL:
Disodium EDTA.........................................................................1.58g
ZnSO4·7H2O................................................................................0.7g
MnSO 4 ·4H 2 O..............................................................................0.18g
FeSO 4 ·7H 2 O................................................................................0.16g
CoCl 2 ·6H 2 O..............................................................................0.052g
Na 2 MoO 4 ·2H 2 O........................................................................0.047g
CuSO 4 ·5H 2 O.............................................................................0.047g
Preparation of Medium: Add components, except CaCl 2 ·6H 2 O so-
lution, MgSO 4 ·7H 2 O solution, sodium pyruvate solution, and p-amin-
obenzoic acid solution, to distilled/deionized water and bring volume
to 969.0mL. Mix thoroughly. Autoclave for 15 min at 15 psi pressure–
121°C. Cool to 45°–50°C. Aseptically add in the following order:
10.0mL of the sterile CaCl 2 ·6H 2 O solution, 10.0mL of the sterile
MgSO 4 ·7H 2 O solution, 10.0mL of sterile sodium pyruvate solution,
and 1.0mL of sterile p-aminobenzoic acid solution. Mix thoroughly.
Aseptically distribute into sterile tubes or flasks.
Use: For the heterotrophic cultivation and maintenance of Pseudomo-
nas thermocarboxydovorans.