- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Nicotinic Acid Medium (DSMZ Medium 152)
[所属分类:培养基配方] [发布时间:2021-6-18] [发布人:网站管理员2] [阅读次数:] [返回]
Nicotinic Acid Medium
(DSMZ Medium 152)
Nicotinic acid................................................................................5.0g
Cysteine-HCl·H 2 O........................................................................0.5g
NaHCO 3 ........................................................................................0.4g
NaCl.........................................................................................80.0mg
KH 2 PO 4 ....................................................................................40.0mg
K 2 HPO 4 ....................................................................................40.0mg
CaCl 2 ·2H 2 O ...............................................................................8.0mg
MgSO 4 ·7H 2 O.............................................................................8.0mg
Distilled water......................................................................1000.0mL
pH 8.2 ± 0.2 at 25°C
Preparation of Medium: Add nicotinic acid to distilled/deionized
water and bring volume to 1.0L. Gently heat and bring to boiling. Boil
with mixing until nicotinic acid is fully dissolved. Cool to 25°C. Add
remaining components. Readjust volume to 1.0L with distilled/deion-
ized water. Mix thoroughly. Adjust pH to 8.2. Distribute into tubes or
flasks under 100% nitrogen atmosphere. Autoclave for 15 min at 15 psi
pressure–121°C.
Use: For the cultivation and maintenance of Eubacterium barkeri.
(DSMZ Medium 152)
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
Yeast extract................................................................................10.0gNicotinic acid................................................................................5.0g
Cysteine-HCl·H 2 O........................................................................0.5g
NaHCO 3 ........................................................................................0.4g
NaCl.........................................................................................80.0mg
KH 2 PO 4 ....................................................................................40.0mg
K 2 HPO 4 ....................................................................................40.0mg
CaCl 2 ·2H 2 O ...............................................................................8.0mg
MgSO 4 ·7H 2 O.............................................................................8.0mg
Distilled water......................................................................1000.0mL
pH 8.2 ± 0.2 at 25°C
Preparation of Medium: Add nicotinic acid to distilled/deionized
water and bring volume to 1.0L. Gently heat and bring to boiling. Boil
with mixing until nicotinic acid is fully dissolved. Cool to 25°C. Add
remaining components. Readjust volume to 1.0L with distilled/deion-
ized water. Mix thoroughly. Adjust pH to 8.2. Distribute into tubes or
flasks under 100% nitrogen atmosphere. Autoclave for 15 min at 15 psi
pressure–121°C.
Use: For the cultivation and maintenance of Eubacterium barkeri.



