展开
个人中心 我的订单 购物车
编号:
批号:
培养基配方
您现在的位置: 网站首页 >> 培养基配方

Thermovibrio Medium (DSMZ Medium 961)

[所属分类:培养基配方] [发布时间:2021-9-8] [发布人:网站管理员2] [阅读次数:] [返回]
Thermovibrio Medium
(DSMZ Medium 961)

山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com

Composition per liter:

Synthetic seawater .................................................................970.0mL
Potassium nitrate solution........................................................10.0mL
Yeast extract solution...............................................................10.0mL
Na2S·9H2O solution.................................................................10.0mL
pH 6.5 ± 0.2 at 25°C
Synthetic Seawater:
Composition per liter:
NaCl............................................................................................ 27.7g
MgSO4·7H2O................................................................................ 7.0g
MgCl2·6H2O ................................................................................. 5.5g
CaCl2·2H2O ................................................................................ 0.75g
KCl.............................................................................................. 0.65g
KH2PO4......................................................................................... 0.5g
(NH4)2SO4 .................................................................................. 0.25g
NaBr.............................................................................................. 0.1g
H3BO3 ......................................................................................... 0.03g
SrCl2·6H2O...............................................................................15.0mg
Resazurin ...................................................................................1.0mg
KI ............................................................................................ 0.05mg
Preparation of Synthetic Seawater: Add components to distilled
water and bring volume to 1.0L. Mix thoroughly.
Na2S·9H2O Solution:
Composition per 10.0mL:
Na2S·9H2O.................................................................................... 0.5g
Preparation of Na2S·9H2O Solution: Add Na2S·9H2O to dis
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Autoclave under 100% N2 for 15 min at 15 psi pressure–121°C. Cool
to room temperature.
Yeast Extract Solution:
Composition per 10.0mL:
Yeast extract.................................................................................. 1.0g
Preparation of Yeast Extract Solution: Add yeast extract to dis
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Autoclave under 100% N2 for 15 min at 15 psi pressure–121°C. Cool
to room temperature.
Potassium Nitrate Solution:
Composition per 10.0mL:
KNO3 .......................................................................................... 0.33g
Preparation of Potassium Nitrate Solution: Add KNO3 to dis
tilled/deionized water and bring volume to 10.0mL. Mix thoroughly.
Autoclave for 15 min at 15 psi pressure–121°C. Cool to room temper
ature.
Preparation of Medium: Gently heat and bring 1.0L synthetic sea
water to boiling. Boil for 3 min. Cool to 25°C while sparging with 80%
H2 + 20% CO2. Adjust pH to 6.8–7.0. Distribute 20.0mL aliquots into
100mL serum bottles under 80% H2 + 20% CO2. Autoclave for 15 min
at 15 psi pressure–121°C. Aseptically and anaerobically add per
20.0mL of medium, 0.2mL sterile potassium nitrate solution, 0.2mL
sterile yeast extract solution, and 0.2mL sterile Na2S·9H2O solution.
Mix thoroughly. Adjusted pH should be 6.5.
Use: For the cultivation of Thermovibrio ruber.
  版权所有:山东拓普生物工程有限公司 营销服务热线:0535-8028556 邮箱:topbiol@163.com
© 2016-2020 ALL RIGHTS RESERVED. 鲁ICP备15006604号 技术支持:数字金都
购物车 去顶部